Welcome, Guest. Please login or register.

Author Topic: confused!  (Read 145 times)


  • Newbie
  • *
  • Posts: 1
    • View Profile
« on: »
ok, so I'm building an oak rack for my wife (quilt) and the plans call for "1/4" radius" on each of the legs, but doesn't explain further.  So does this mean router a 1/4" cove on all four edges of the leg, or ???  Then the plan says do a 3/8" roundover on each edge.  The picture shows each leg thinner starting 2" from the top and bottom (ie the 1/4 radius?  totally don't get it!  thanks for the guidance!  (plans could be more specific on how to do this for newbies!)   eagleye